Shopping Cart | About Us | Send Us Email | Shipping Policies

Order online or
by phone:
1-800-246-4726

> Home > Equipment and Supplies > Frame Making > Frame Making Clamps

Frame Making Clamps

Find clamps here which may be used to hold the corners of the frame mouldings firmly together while inserting V-Nails.

Items on this page:

High-Tension Nylon Band Clamp by Pony

Item #867

Click Picture to Enlarge

15 feet of 1” wide, high strength nylon webbing which enables the perimeter clamping of frames prior to joining.
Will hold a 3ľ ft x 3ľ ft frame. Includes four corner brackets and cinching ratchet. Clamps frames of any width.

Band clamping is highly recommended as a final check to make sure all the miters join cleanly before nailing begins. Most V-Nail presses allow the frame to remain in the strap for nailing. This clamp will strap rectangular, round and irregular shapes. Includes steel wrench to tighten the strap and apply final clamping pressure. The cheapest, fastest way to make sure your frame requires no additional sanding prior to to joining.

Everyday Low Price: $24.95

Quality Dual-Tightening Nylon Strap Clamp by Pony

Item #1225

Clamps frames of any width. Durable, deeply recessed corner brackets threaded with 1" wide high strength nylon webbing fit neatly over the corners of your frame as you tighten the strap by two methods: first by ratcheting and then by turning the screw-handle to apply final clamping pressure. Consists of 15 feet of high strength nylon webbing. Will hold a 3ľ ft x 3ľ ft frame.

Strap clamping is highly recommended as a final check to make sure all the miters join cleanly before nailing begins. Most V-Nail presses allow the frame to remain in the strap for nailing.

Click Picture to Enlarge

Everyday Low Price: $34.95

Four Corner Steel Rod Framing Clamp by Pony

Item #9448

Clamps frames of any width. A complete frame clamping kit that includes eight lengths of 24" threaded rods, couplers to extend lengths to 48", strong, lightweight plastic corners and firm-holding thumbnuts which allow size adjustments for rectangular clamping. Clamps frames up to 4 ft x 4 ft. Clamp faces are 1" x 1Ľ". Rods are made of plated steel.

Consider this four corner clamping system as an alternative to strap clamps. Some framers prefer rods to straps as strap clamps can be awkward and cumbersome to get fitted around the frame.

Everyday Low Price: $29.95

Corner Clamp by Pony

Item #9180

Clamps frames up to 2" wide. Provides generous clearance for V-Nailing and gluing. Has plastic coated die-cast jaws for non-marring tightening. Rear jaw swivels for easy adjustment on different material thicknesses. Has large comfortable handle and acme threads for tightening. Clamps two sides of the frame at once. Provides support on both the inside and the outside of the frame moulding, preventing mouldings with high outside contours from collapsing inward as the V-Nail is driven.

Everyday Low Price: $24.95

Corner Clamp by Logan

Item #938

Logan Corner Clamp Clamps frames up to 2-˝" wide. Clamps two sides of the frame at once. Provides support on both the inside and the outside of the frame moulding, preventing mouldings with high outside contours from collapsing inward as the V-Nail is driven. All steel construction.

Everyday Low Price: $39.95

Pony Rapid Acting Miter Vise
Item #9170

This Rapid Acting miter clamp will secure miter joints and leave the joint fully exposed for gluing and side nailing. It accepts 3" wide material and has a 1" jaw height. This clamp is made of die cast aluminum and has large comfortable handles and acme threads for strength. Less awkward than traditional miter vise, it allows for shimming of extended frame legs as frame legs are just inches about the table surface when locked in the clamp.

Everyday Low Price: $39.95

Traditional Miter Vise

Item #838

Miter Vice The vice holds two sides of the frame firmly in position for side nailing. Clamps any molding up to 4 inches wide. Joins any frame larger than 3½" x3½". Rotates 360°. Has speed handles.

Everyday Low Price: $89.95

Try these BOOKS and VIDEOS on Clamping and Frame Making:

Home Book of Picture Framing: Professional Secrets of Mounting, Matting and Framing A comprehensive guide to frame making, mounting, and matting.

Cutting and Joining Wood and Metal Moulding Learn the methods and machines used for cutting and joining wood and metal moulding.

Return to top of page

Find artwork to fill your frames.


Shopping Cart \| About Us \| Send Us Email \| Shipping Policies \| Site Map \| Home
Copyright © 2005 Framing4yourself.com. All Rights Reserved