 |
|
 |
|
 |
|
 |
|
The kit includes everything you need
to present a print for retail. |
|
Step 1: Place the window mat face
down and lay the print image side in the window. |
|
Step 2: Peel the release paper
off the back of one of the self-adhesive mounting strips. |
|
Step 3:
Assemble the strip along the edge of the print with the Mylar flange
overlapping. Adhere the strip to the back of the mat.
|
 |
|
 |
|
 |
|
 |
|
Step 4: Assemble strips along
each edge of the artwork. The Mylar flanges trap the print in
place without using adhesive on it. This makes it easy for the
customer to remove the print. |
|
Step 5: Align the backing board
and window mat (with print mounted) edge-to-edge along the top edge. |
|
Step 6: Apply the white
artist's tape in two places. Apply a tab horizontally and a
second tab vertically to form a hinge. |
|
Step 7:
The window mat will now hinge onto the backing board. |

| Step 8: Slip the
mounted and matted art into the crystal clear plastic bag. |
|
|

| Step 9: Remove
the pull tab to expose the adhesive on the bag's flap. |
|
|

| Step 10: Close
the flap toward the back of the matted print and seal
it. |
|
|

| Your matted print is
ready for retail. For alternative ways to use this kit
see the FREE Newsletter, Volume 1, Issue 4 on the Tips and
Techniques page. |
|