|
#387-L Black Wood Picture Frame
|
 |
|
Option 1:
4 sectional frames of
#387-L, already cut
and ready to be
joined without tools,
as follows:
1 - 8x10
1 - 11x14
1 - 16x20
1 -
19x21
|
Option 2:
4 lengths of #387-L sufficient to make an 8x10, 11x14, 16x20,
19x21 as follows:
3 - 5 ft
2 - 4 ft
2 - 3 ft.
|
|
|
ATG Tape |
Double
sided adhesive that transfers off of the roll. For double matting,
attaching dust covers. For use in
ATG applicator gun.
1/2" wide / 36 yds. |
Bumper Pads |

Adhesive backed bumper pads to protect your walls. Remove the protective liner
and place the pads on the back corners of your frame. Pressure sensitive
adhesive. 100 bumper pads. |
|
 |
|
Kraft Paper Dust Covers
|

Use as a dust cover for the backs of frames.
(25) 24"x36" Dust Covers |
Filmoplast P-90 Mounting Tape |

3/4" wide x 55 yards
Acid-free self-adhesive tape. Opaque, white. Tear resistant. Will not yellow, harden or seep through. pH neutral. Water removable.
. |
Acid Free Masking Tape |
For
taping the backs of V-Groove Mats. Archival quality, acid free. 1/2" wide / 60 yds.
|
Strap Hangers and Screws |
Tie
your hanging wire to strap hangers to hang your framed art.
20 - hangers and screws
|
|
 |
|
Positionable Mounting
Adhesive (PMA)
|
|

1 - Roll 11" x 50 ft. includes release
paper and burnishing tool.
Pressure activated adhesive that transfers off the sheet and onto the back of the artwork in a uniform coat.
Transfer by burnishing the sheet onto the back of the artwork with the
burnishing tool included. The sheet is peeled back, leaving the uniform coat of adhesive on the artwork.
|
See-Thru Mounting Strips |

4" long Mylar® mounting strips with adhesive backing. Each strip
is adhered to the mounting board beside the artwork so the mylar flange overlaps
the face of the artwork. The artwork is cradled between the strips. 60 strips in the box.
|
Picture Hanging Wire |

Medium duty wire
for weight up to 25 lbs. (20 feet)
|
|