RabbetSpace® Rabbet Depth Extender Kit

Step 1: Measure the depth of the contents as they extend out of the back of the frame.

Step 2: Start by determining which size RabbetSpace® you need.

Step 3: Miter cut each stick to the proper length. Use the wood cutting strip to support the stick during sawing.

Step 4: Place the first piece on the back of the frame. Using the special RabbetSpace® drill bit, drill the first hole near the corner.

Step 5: Temporarily screw the first piece in near the corner. For best results when screwing, use a magnetic bit holder and a long reach X-drive Philips bit.

Step 6: With the first piece temporarily attached at the corner, continue drilling the holes at intervals along the RabbetSpace® . For best results, use a bevel square to line up the RabbetSpace® with the frame as you drill the holes.

Step 7: After drilling the holes, remove the four pieces and clean up the drilling dust.

Step 8: Next load the stack of contents into the frame, using black foamboard as the final piece in the stack. Attach the RabbetSpace® with the screws provided. You’re finished!

When the stack of contents is thicker than the frame is deep, this kit provides the essential supplies to secure the stack and blend the back of the frame into the rest of the frame package.

Kit includes:
    (7) 5 ft. RabbetSpace sticks
    (1) Jorgenson miter box with saw
    (1) 36" wood cutting strip
    (1) Special RabbetSpace drill bit
    (6) Black on black foamboard 20"x32"
    (150) RabbetSpace screws

Kit Price $79.95

(items purchased separately ~~$90.42)~~

Choose your offset...

1/8"

1/4"

3/8"

1/2"

RabbetSpace® Rabbet Depth Extenders

The kit includes a bundle of seven 5 foot sticks made of black acrylic. 35 feet in all. Choose from:

1/8" offset
1/4" offset
3/8" offset
1/2" offset

Also includes 150 screws.

Regular Price: $24.95-27.95

Jorgenson Miter Box with Saw

Use this saw along with the wood cutting strips to miter cut your RabbetSpace sticks. Miter box includes 14" back saw. Tool cuts 45º and 90º. Extended front lip design steadies the miter box against your wood bench.

Regular Price $14.99

36" Wood Cutting Strip and
Special RabbetSpace® Drill Bit


A wood cutting strip should be placed under the stick when sawing. Regular Price: $3.99	The wood cutting strip supports the RabbetSpace stick as you cut, insuring clean, precise miters.

The special RabbetSpace® drill bit makes the correct diameter and depth of pilot hole. Regular Price: $4.50	The drill bit has a special stop on it so you can't drill too deep. It drills precise holes for the screws that come with RabbetSpace®.

Black on Black Foamboard

Black on black foamboard should be used as the last piece in the stack to create a seamless blend between the black RabbetSpace® and the back of the stack.

The kit includes a package of (6) 20"x32" black on black foamboards.

Regular Price: $39.99

How to Install RabbetSpace® Rabbet Depth Extenders

Return to top of page