self-adhesive-foamboard

Order online or
by phone:
1-800-246-4726

> Home > Matboard and Foamboard > Foamboard > Self-Adhesive Foamboard

Self-Adhesive Foamboard - Crescent Perfect Mount 32"x40" - 3/16" Thick

Item #F923

3/16" Thick 32"x40" Sheet

Here's How it Works...


Step 1: Peel away the release paper to expose the tacky side of the foamboard.		Step 2: Place the artwork image side up on the tacky side of the board. Press the top edge down to begin with.


Step 3: Work your hand gradually down the artwork, pressing as you go.	Step 4: Press along the full length of the artwork until it is adhered. Working down the artwork prevents buckles and creases.	Step 5: Align the release paper along the top edge of the foamboard and lower it over the artwork.


Step 6: Cover the artwork with the glossy side of the release paper.	Step 7: Apply firm even pressure, working from the center to the outside edge with a burnisher or a squeegee.	Step 8: Leave the release paper in place and place a panel of glass or similar weight over the artwork and let the bond cure for 12-24 hours.


Step 9: Peel away the release paper and your artwork is firmly bonded to the foamboard. Now place a window mat over the foamboard if you wish.	Step 10: You can use the same panel of glass you used for weighting to glaze the artwork. Now just load it in a frame.	Step 11: Read the instructions on release paper for further tips and techniques.

Self-Adhesive Foamboard - Crescent Perfect Mount 32"x40" - 3/16" Thick

Item F-923

Sale Price: $11.95 per sheet
7 Sheet Mimimum or Mix with Matboard see guidelines

Carton of 25 Sheets $285.00
(works out to $11.40 per sheet)


Shopping Cart \| About Us \| Send Us Email \| Shipping Policies \| Site Map \| Home
Copyright © 2005 Framing4yourself.com. All Rights Reserved